图文讲解分类
TX11石材晶硬粉
TX11晶硬粉Crystal powder
  • 点击数:2583
  • 产品类别: 餐厅用品 装修图库
  • 产品描述:该款晶硬粉通过结合抛光机和抛光垫组合使用,它可以节省成本,时间,人工和机器损耗。使石材光泽如新,富有层次感,提高抗磨损性能。
  • TX11晶硬粉(加强型)Crystal powder(enhanced)

    品 牌:净 魅

    TX11石材晶硬粉可用于湿磨和精抛光表面暗淡的石材。修补磨损表面,抛光石面,增加其光亮度,防滑等作用。

    产品特点:

    该款晶硬粉通过结合抛光机和抛光垫组合使用,它可以节省成本,时间,人工和机器损耗。使石材光泽如新,富有层次感,提高抗磨损性能。具有防污渍渗透、防表面划伤、防滑等。配合净魅系列适当组合可以让各种石材呈现******魅力。

    使用说明:

    彻底清洁石材表面,去除旧蜡,将结晶粉与水搅拌成糊状,然后取本品适量,配合抛光垫使用。在研磨过程中,根据不同的石材和磨损度,加入少量水并始终保持表面湿润反复研磨直至表层结晶。使用吸尘器清理残余物。最后,更换抛光垫进行精磨,是石材光亮如新。

    包装规格:5KG/桶;20KG/桶




    TX11 hard stone crystal powder can be used for wet grinding and fine polished stone surface dull. Repair worn surfaces, polished stone surface, increasing its brightness, anti-skid effect.

    Features:

    By combining polishing machine and polishing pad used in combination, it can save cost, time, labor, and machine wear and tear. The stone looks like new, rich layering, to improve wear resistance. It has a stain penetration, anti-scratch surface, anti-skid.

    Instructions for use:

    Thoroughly clean the stone surface to remove old wax, crystalline powder mixed into a paste with water, and then take this amount of goods, with the use of the polishing pad. In the grinding process, depending on the degree of wear and stone, adding a small amount of water and always keep the surface moist repeatedly ground until the surface crystallization. Use a vacuum cleaner to clean up the residue. Finally, the replacement of the polishing pad grinding, stone is bright as new.

    Precautions:

      1. Before using the stone must be re-polished or glossy surface, the rough surface of stone largely ineffective;

      2. Avoid contact with skin and eyes, away from children's reach and shade;


版权所有 Copyright(C)2009-2014 我爱餐厅网  粤ICP备14073523号
扫描一下